Steel Warehouse Project in Panama
| Item | |
| Length | 75m |
| Width | 40m |
| High | 8m |
| Area | 3000m² |
| Dead load | 4KN/m2 |
| Live load | 2.5KN/m2 |
| Wind load | 0.66KN/m2 |
| Amount of Steel | 300.8T |
Main Structure
Steel Column:
Q345B Welding H section Beam, Painted: three layer Epoxy zinc rich paint
Roof Beam: Q345B Welding H section Beam,
Painted: three layer Epoxy zinc rich paint
Crane Girder: Q345B Welding H section Beam,
Anti-wind Column: Q345B Welding H section Beam,
Secondary Structure
Roof Horizontal Bracing: Q235B Angle Steel, Painted: three layer Epoxy zinc rich paint Wall X Cross Bracing: Q235B Double Angle Steel, Painted: three layer Epoxy zinc rich paint
Tie Beam: Q235B Welding Pipe, Painted: three layer Epoxy zinc rich paint
Roof Purlin: Galvanized C section steel
Wall Purlin: Galvanized C section steel
Steel Rod: Galvanized Steel Rod
Maintenance Structure
Roof: 0.5mm Single Color sheet with glass wool insulation with foil,
Wall: 0.5mm Single Color sheet with glass wool insulation with foil,
Window: Window
Door: rolling door